LG&E and KU customers, Kentucky · Rebate

LG&E and KU Residential Rebates

Run by LG&E and KU Energy (Louisville Gas and Electric and Kentucky Utilities)

LG&E and KU residential customers in Kentucky can get $300 for a heat pump water heater or central air conditioner, $400 for a ductless or air source heat pump, and $250 for a 95% AFUE natural gas furnace.

Open Checked Oct 28, 2026

Amounts

How much you get

A fixed rebate per qualifying unit: $300 for a heat pump water heater, $300 for a split-system central air conditioner, $400 for a ductless (mini split) heat pump, $400 for a split-system air source heat pump, $250 for a natural gas furnace. The amount depends on which of these fits your install.

What you installYou get
Heat pump water heater$300
Central air conditioner (split system)$300
Ductless heat pump (mini split)$400
Air source heat pump (split system)$400
Natural gas furnace$250

Eligibility

Do I qualify?

You need to meet all 2 of these.

  • You must be an LG&E or KU customer on one of these rates (RS, RTOD-D, RTOD-E, RGS or VFD). The gas furnace rebate needs LG&E natural gas service; the electric equipment rebates need LG&E or KU electric service.

  • Equipment must be new, installed at your home, and meet the efficiency levels listed. Not all ENERGY STAR equipment qualifies.

Equipment

What equipment counts

The program sets these minimums.

  • Uniform Energy Factor (UEF) greater than or equal to 2.2.

  • Product Type "CAC - Split System"; SEER2 greater than or equal to 15.2.

  • Product Type "HP - Mini or Multi Split"; SEER2 ≥ 15.2, EER2 ≥ 11.7, HSPF2 ≥ 7.8.

  • Product Type "HP - Split System"; SEER2 ≥ 15.2, HSPF2 ≥ 7.8.

  • Efficiency (AFUE) greater than or equal to 95%.

  • ENERGY STAR certified.

Applying

How to apply

You apply online. Natural gas furnaces do not qualify after December 31, 2028.

  1. Check the equipment qualifies.

    Compare the model's efficiency with the program's list, or email EECustomerSupport@lge-ku.com to ask about a model.

    Go to lge-ku.com

  2. Buy and install the equipment.

    A licensed contractor is recommended but not required. You can start the application any time but can only submit it after installation.

  3. Apply online, one rebate per application.

    Log into My Account, click Save Money and Energy, then start Residential Rebates (or use the guest link with your contract account number and service ZIP code). Upload photos of the installed unit and its label, the invoice or receipt, and the AHRI certificate if you have it.

    Go to lge-ku.com

  4. Receive your rebate.

    By mailed check or electronic payment, usually in four to six weeks.

What you'll need
  • Invoice or receipt

  • Photo of the installed equipment

  • Photo of the manufacturer's label showing model and serial number

  • AHRI certificate, if available

Forms and instructions, including for applying by mailEnergy efficiency programs - LG&E and KU

Questions about applying1-800-331-7370 or EECustomerSupport@lge-ku.com

Your address

Next steps

Check that it covers your address. Then, if you want, ask for a contractor quote.

FAQ

Questions

How much does LG&E and KU Residential Rebates pay?

$250 to $400, depending on what you install. The table under How much you get lists each amount.

Do I need to be a LG&E or KU customer?

Yes. It’s only for homes in LG&E and KU customers, Kentucky. See Do I qualify for the details.

What’s the deadline?

No fixed deadline. Apply any time while it’s open.

Is it still available?

Yes. It was open when we last checked, on October 28, 2026.

Do I have to buy the equipment from a particular store or contractor?

No. You can buy it anywhere, as long as you upload an image or PDF of the receipt or invoice.

Can I install the equipment myself?

Yes, but a licensed contractor is recommended. If you don't hire one, you are solely responsible for meeting all local, state and federal codes.

Can I apply for several rebates on one application?

No. Each application covers one rebate, so submit a separate application for each piece of equipment.

Which model number should I give for a central air conditioner or heat pump?

The outdoor unit's. It is usually on one side of the outdoor unit or inside an access panel.

Plain words

Words used on this page

SEER2 and EER2
Cooling efficiency ratings on the model’s spec sheet. Higher is better.
HSPF2
A heat pump’s heating efficiency rating. Higher is better.
UEF
A water heater’s efficiency rating. Higher is better.

References

Sources

This page is built from these official pages, run by the program itself.

  1. Residential Rebates - LG&E and KU (with FAQ)lge-ku.com · Read Oct 28, 2026 · Re-checked weekly
  2. Energy efficiency programs - LG&E and KUlge-ku.com · Read Oct 28, 2026 · Re-checked monthly

When one of these pages changes, we re-check this page against it.

Report a problem with this page

Nearby

More in Kentucky

  • LG&E and KU customers, Kentucky

    LG&E and KU Bring Your Own Thermostat

    Up to $50

    LG&E and KU electric customers in Kentucky get $50 for enrolling an eligible smart thermostat in demand response, plus $5 for each thermostat adjustment event it takes part in each season.

    Checked Oct 28, 2026

  • LG&E and KU customers, Kentucky

    LG&E and KU Online Marketplace

    Up to $75

    LG&E and KU customers in Kentucky get instant discounts at the utility's online store - $75 off a learning thermostat or $50 off a smart thermostat (one per customer), and $10 off smart power strips or $5 off smart plugs (up to two).

    Checked Oct 28, 2026

  • LG&E and KU customers, Kentucky

    WeCare for Homeowners and Renters

    Work done at no cost

    Income-qualified LG&E and KU customers in Kentucky, owners or renters, get a free home energy audit and upgrades such as LED bulbs, smart thermostats, water-saving devices and, in some homes, insulation and duct sealing.

    Checked Oct 28, 2026