CPAU customers, California · Rebate
Electrification add-on rebates: panel, wiring, insulation, permits (City of Palo Alto Utilities)
Run by City of Palo Alto Utilities (CPAU)
With a CPAU heat pump or induction rebate, Palo Alto homeowners can add up to $1,000 ($2,000 if income-eligible) for a panel upgrade, $1,000 for attic insulation, $500-$1,000 per new circuit or device, and a permit fee rebate of up to $662.
Amounts
How much you get
Add-ons only with a heat pump water heater, heat pump HVAC or induction rebate, within 6 months of that install. The amount depends on which of these fits your install.
| What you install | You get |
|---|---|
| Electrical panel upgrade | N/A |
| Income-eligibleElectrical panel upgrade | N/A |
| Attic/roof insulation ($0.75/sq ft) | N/A |
| Heat pump water heater projectsPrewiring/wiring circuit | $1,000 |
| Splitter/pauser device or subpanel, other projectsCircuit | $500 |
| Per eligible permitPermit fee | N/A |
| Income-eligiblePanel upgrade permit fee | N/A |
Eligibility
Do I qualify?
You need to meet all 4 of these, plus one that applies only in some cases.
City of Palo Alto Utilities residential customer with active electric and gas service.
The property owner must be the applicant (a rental property qualifies, but the owner applies). Renters can ask their landlord to apply.
What to doIf you rent, ask your landlord to apply through the Rebate Hub.
Panel: new capacity no more than 200 amps (same-amperage replacements qualify). Insulation: R-30 or better in attics, R-19 for Eichler and flat-roof homes. Circuits must be wired to the source and serve the new appliance.
The higher income-eligible amounts are for residents who qualify for the Residential Energy Assistance Program (REAP), which requires enrollment in the Rate Assistance Program (RAP) for financial need.
What to doApply for CPAU's Rate Assistance Program (household income up to 80% of area median income).
- Only in some cases
Only with a heat pump water heater, heat pump HVAC or induction cooktop/range rebate application, and the add-on work must be done within 6 months of that installation.
What to doApply for the add-on in the same Rebate Hub application as a core appliance rebate.
Equipment
What equipment counts
Applying
How to apply
You apply online. Final application within 90 days after final inspection; reservation required before installation. Get approved before you buy anything.
- Create a project in the Rebate Hub.
In the CPAU Rebate Hub (Rock Rabbit), create a project, pick the rebate and any add-on rebates. A CPAU Instant Rebate Partner contractor can take the rebate off the price and apply for you.
- Submit a reservation before installing.
Include photos of the existing gas appliance and its nameplate. Funds are held for 120 days once approved.
- Install and pass final inspection.
- Submit final documents within 90 days of final inspection.
Itemized contractor invoice, photos of the new equipment and nameplate, and proof of final inspection.
- Receive a check.
Mailed within about 6 weeks of approval.
Forms and instructions, including for applying by mailRebate Hub - City of Palo Alto Utilities · Rebate eligibility criteria and required documentation - CPAU Rebate Hub · Residential Energy Assistance Program (REAP) - City of Palo Alto
Questions about applying(650) 713-3411 or switch@paloalto.gov
Stacking
Use it with
You can get these too.
CPAU customers, California
Heat pump HVAC rebate (City of Palo Alto Utilities)
Up to $5,000 back
Palo Alto homeowners with CPAU electric and gas service get up to $2,500 ($5,000 for income-eligible residents) for replacing a gas, propane, oil or wood heater with an all-electric heat pump. Reserve the rebate before installing.
Checked Oct 27, 2026
CPAU customers, California
Heat pump water heater rebate (City of Palo Alto Utilities)
Up to $3,500 back
Palo Alto homeowners with CPAU service get $3,500 for replacing a gas water heater with a NEEA Tier 3 or higher heat pump water heater, or $500 when replacing an electric resistance one. An extra $500 applies to switches between July 1 and October 31, 2026.
Checked Oct 27, 2026
CPAU customers, California
Induction cooktop and range rebate (City of Palo Alto Utilities)
Up to $1,000 back
Palo Alto homeowners get $500 ($1,000 if income-eligible) for replacing a gas cooktop or range with a permitted ENERGY STAR induction cooktop or range, or $50 ($100 if income-eligible) for a portable induction cooktop.
Checked Oct 27, 2026
Your address
Next steps
Check that it covers your address. This program has to approve you before you buy anything, so start with the program, not a contractor quote.
Is it available at your address?
Before anything else
Apply for the add-on in the same Rebate Hub application as a core appliance rebate.
Your quote request is in If a contractor we work with serves your ZIP, they can contact you. We take one request per person; contact us to change it.
Get an email if this program changes
We'll write if its amount, status or deadline changes. Nothing else.
FAQ
Questions
How much does Electrification add-on rebates: panel, wiring, insulation, permits (City of Palo Alto Utilities) pay?
$500 to $1,000, depending on what you install. The table under How much you get lists each amount.
Do I need to be a CPAU customer?
Yes. It’s only for homes in CPAU customers, California. See Do I qualify for the details.
Do renters qualify?
The property owner must be the applicant (a rental property qualifies, but the owner applies). Renters can ask their landlord to apply. If you rent, ask your landlord to apply through the Rebate Hub.
Do I need approval before I buy?
Yes. Apply before you buy or install anything; purchases made first don’t qualify. Only with a heat pump water heater, heat pump HVAC or induction cooktop/range rebate application, and the add-on work must be done within 6 months of that installation. Apply for the add-on in the same Rebate Hub application as a core appliance rebate.
What’s the deadline?
No fixed deadline. Apply any time while it’s open.
Can I combine it with other rebates?
Yes, with Heat pump HVAC rebate (City of Palo Alto Utilities), Heat pump water heater rebate (City of Palo Alto Utilities) and Induction cooktop and range rebate (City of Palo Alto Utilities). See Use it with.
Is it still available?
Yes. It was open when we last checked, on October 27, 2026.
Plain words
Words used on this page
References
Sources
This page is built from these official pages, run by the program itself.
- Rebate Hub - City of Palo Alto Utilities
- Rebate eligibility criteria and required documentation - CPAU Rebate Hub
- Residential Energy Assistance Program (REAP) - City of Palo Alto
When one of these pages changes, we re-check this page against it.
Nearby
More in California
CPAU customers, California
Residential Energy Assistance Program, free upgrades (City of Palo Alto Utilities)
Work done at no cost
Palo Alto households enrolled in the Rate Assistance Program for financial need can get free efficiency upgrades (LEDs, insulation, weatherization, a portable induction cooktop) and, for homeowners, free heat pump HVAC, heat pump water heater, induction range and electric dryer installs.
Checked Oct 27, 2026
All of California
Equitable Building Decarbonization Direct Install Program (no-cost home electrification)
Work done at no cost
The CEC's Equitable Building Decarbonization Direct Install Program installs heat pumps, heat pump water heaters and other electric and efficiency upgrades at no cost for low-income households (up to 80% of area median income) in selected under-resourced communities. Owners and renters in the initial focus areas apply through their regional administrator.
Checked Oct 27, 2026
All of California
GoGreen Home Energy Financing (CAEATFA)
Up to $150,000 of work at no cost
GoGreen Home connects California homeowners and renters with credit unions offering lower-rate, lien-free loans for heat pumps, solar plus storage and other energy upgrades. In Priority Populations areas, borrowers with income up to $150,000 can get 0% APR for up to 10 years on heat pump projects up to $30,000.
Checked Oct 27, 2026